PCB 122A
http://www.intl-sensor.com Time:2008/6/10 13:12:17 Count : 117 Times
PERFORMANCE |
ENGLISH |
SI |
Sensitivity(± 20 %) |
1.1 pC/psi |
|
Measurement Range |
3 kpsi |
|
Maximum Pressure |
5 kpsi |
|
Resolution |
20 mpsi |
|
Resonant Frequency |
≥ 25 kHz |
|
Rise Time(Reflected) |
≤ 20 µ sec |
|
Non-Linearity |
≤ 1 % FS |
|
ENVIRONMENTAL |
|
|
Acceleration Sensitivity |
≤ 0.002 psi/g |
|
Temperature Range(Operating) |
-450 to +500 °F |
|
Temperature Coefficient of Sensitivity |
≤ 0.01 %/°F |
|
Maximum Flash Temperature |
4000 °F |
|
Maximum Shock |
10,000 g pk |
|
ELECTRICAL |
|
|
Output Polarity(Positive Pressure) |
Negative |
|
Capacitance |
18 pF |
|
Electrical Isolation |
≥ 108 ohm |
|
Insulation Resistance(at room temp) |
≥ 1012 ohm |
|
PHYSICAL |
|
|
Sensing Element |
Quartz |
|
Sensing Geometry |
Compression |
|
Housing Material |
17-4 Stainless Steel |
|
Diaphragm |
Invar |
|
Sealing |
Epoxy |
|
Electrical Connector |
10-32 Coaxial Jack |
|
Helium Flow Rate(at 1,500 psi) |
40 scf/hr |
|
Weight |
4.2 oz |
|
SUPPLIED ACCESSORIES: |
Model 070A08 Cable adaptor (micro 10-32 jack to BNC jack) (1) |
All specifications are at room temperature unless otherwise specified.
|
NOTES: |
[1] |
This pressure applies to sensor probe and adaptor assembly. |
[2] |
Maximum working pressure may be limited by helium source. |
[3] |
Source pressure should be at least twice the peak pressure but not more than 10 times the lowest pressure |
[4] |
Resolution dependent on range setting and cable length used in charge system. |
[5] |
With helium flow. |
[6] |
Zero-based, least-squares, straight line method. |
|
Keywords:
Rocket motor pressure probe, 3000 psi, 1 pC/psi, Helium bleed, conical end seal, 7/16 thd
Measurement Range: 3000 psi (20685 kPa)
Sensitivity: (±20%) 1.1 pC/psi (0.159 pC/kPa)
Temperature Range: (Operating) -450 to +500 °F (-268 to +260 °C)
Electrical Connector: 10-32 Coaxial Jack
Weight: 4.2 oz (120 gm)
ProductsCompany
PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers,and associated electronics for the measurement of dynamic pressure, force, and vibration.The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible.
Contact
Beijing Bron Science&Technology Commerce Co., Ltd.
Address:Room 512 of oriental Fortune,No.2 yard, North of the Anhua,Chongwen District,Beijing
Zip:100062
Tel:86 010-67114885/67124125/67152280
Fax:86 010-67124125
http://www.intl-sensor.com
E-mail:pcb@intl-sensor.com
INTL-SENSOR CopyRight
© Copyright By WWW.INTL-SENSOR.COM All Right
tel:86 010-67152280/67114885/67124125
E-mail:
pcb@intl-sensor.com