RT 3000 Reaction Torque Sensors

http://www.intl-sensor.com Time:2010/8/30 14:24:33 Count : 2534 Times

Ideal for use in measuring reaction torque in assembly operations
Maintenance-free with no moving parts
Wide variety of standard capacities with custom units available

PCB^® Load & Torque, Inc. manufactures a complete line of reaction torque sensors in capacities from 50 lb-in up to 250,000 lb-in (5.7--28,500 Nm). Using a full bridge, strain gage design, Series RTS 3000 reaction torque sensors contain no moving parts and are virtually maintenance free. If one of our standard designs is not suitable for your application, we will provide a quotation for a special unit based on your specific requirements.

Specifications
Output at Rated Capacity	2.0 mV/V nominal
Overload Capacity	150% FS
Non-Linearity	±0.20% FS
Bridge Resistance	350 ohms, nominal
Compensated Temperature Range	+75 to +150 °F
Operating Temperature Range	0 to 200 °F
Temperature Effect on Zero Balance	±0.01% FS / °F
Temperature Effect on Span	±0.01% of reading / °F
Recommended Excitation	10 VDC
Connector	6-PIN Bendix DT02H-10-6P

Model Number	Capacity
073122-00051	50 lb-in (5.7 Nm)
073122-00101	100 lb-in (11.3 Nm)
073122-00201	200 lb-in (22.6 Nm)
073122-00501	500 lb-in (56.5 Nm)
073122-00102	1,000 lb-in (113 Nm)
073134-00501	500 lb-in (56.5 Nm)
073134-00102	1,000 lb-in (113 Nm)
073134-00202	2,000 lb-in (226 Nm)
073136-00502	5,000 lb-in (565 Nm)
073136-00103	10,000 lb-in (1,130 Nm)
073133-00203	20,000 lb-in (2,260 Nm)
073133-00503	50,000 lb-in (5,650 Nm)
073133-00104	100,000 lb-in (11,300 Nm)