PCB 2308
http://www.intl-sensor.com Time:2008/6/10 11:26:54 Count : 156 Times
PERFORMANCE |
ENGLISH |
SI |
Measurement Range(Full Scale Capacity) |
5 in-lb |
|
Sensitivity(output at rated capacity) |
2 mV/V |
|
Non-Linearity |
≤ 0.10 % FS |
|
Hysteresis |
≤ 0.10 % FS |
|
Non-Repeatability |
≤ 0.05 % FS |
|
Resonant Frequency |
0.2 kHz |
|
Maximum Torque |
7.5 in-lb |
|
ENVIRONMENTAL |
|
|
Overload Limit(Mz) |
5 in-lb |
|
Overload Limit(Mx, My) |
2.5 in-lb |
|
Overload Limit(Fx, Fy) |
2.5 lb |
|
Temperature Range(Operating) |
-65 to +200 °F |
|
Temperature Range(Compensated) |
+70 to +170 °F |
|
Temperature Effect on Output(Maximum) |
± 0.002 %Reading/°F |
|
Temperature Effect on Zero Balance(Maximum) |
± 0.002 %FS/°F |
|
ELECTRICAL |
|
|
Bridge Resistance |
700 ohm |
|
Excitation Voltage(Recommended) |
10 VDC |
|
Insulation Resistance |
>5000 M ohm |
|
Zero Balance |
≤ 1 %RO |
|
PHYSICAL |
|
|
Size (Diameter x Length) |
2 in x 2.25 in |
|
Weight |
0.2 lb |
|
Mounting |
Flanged |
|
Deflection at Full Scale Capacity |
0.029 radian |
|
Torsional Stiffness |
175 in-lb/radian |
|
Sensing Element |
Strain Gage |
|
Housing Material(Sensor) |
Anodized Aluminum |
|
Electrical Connector |
PT02E-10-6P |
|
Electrical Connection Position |
Side |
|
SUPPLIED ACCESSORIES: |
Model 181-002A Mating connector (1) |
All specifications are at room temperature unless otherwise specified.
|
NOTES: |
[1] |
Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS. |
[2] |
Singularly applied, i.e. no other extraneous loads. |
[3] |
Over compensated operating temperature range. |
[4] |
Nominal. |
[5] |
FS - Full Scale. |
|
Keywords:
Torque sensor, reaction flange mount, 5 in-lb FS, 2" dia. flanges, PT conn.
Measurement Range: (Full Scale Capacity) 5 in-lb (0.56 N-m)
Sensitivity: (output at rated capacity) 2 mV/V
Mounting: Flanged
Size - Diameter: 2 in (50.8 mm)
Size - Length: 2.25 in (57.2 mm)
Torsional Stiffness: 175 in-lb/radian (20 N-m/radian)
ProductsCompany
PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers,and associated electronics for the measurement of dynamic pressure, force, and vibration.The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible.
Contact
Beijing Bron Science&Technology Commerce Co., Ltd.
Address:Room 512 of oriental Fortune,No.2 yard, North of the Anhua,Chongwen District,Beijing
Zip:100062
Tel:86 010-67114885/67124125/67152280
Fax:86 010-67124125
http://www.intl-sensor.com
E-mail:pcb@intl-sensor.com
INTL-SENSOR CopyRight
© Copyright By WWW.INTL-SENSOR.COM All Right
tel:86 010-67152280/67114885/67124125
E-mail:
pcb@intl-sensor.com