中文 English

Set HomePage Favorite

INTL-SENSOR > Products > PCB 5302C-5310C

PCB 5302C-5310C

http://www.intl-sensor.com Time:2008/6/10 11:35:17 Count : 165 Times

PERFORMANCE

ENGLISH

Measurement Range(Full Scale Capacity)

2000 in-lb

226 N-m

Voltage Output

± 10 V

Frequency Output

10 kHz ± 5 kHz

Digital Output

QSPI

[2]

Maximum Load(Axial)

500 lb

2.2 kN

[3][4][5]

Maximum Load(Lateral)

500 lb

2.2 kN

[3][4][5]

Maximum Moment

1500 in-lb

169 N-m

[3][4][5]

Accuracy

± 0.10 % FS

[6]

Frequency Range(of Electronics)

2 kHz

[7]

ENVIRONMENTAL

Overload Limit(Bolt Joint Slip)

3300 in-lb

373 N-m

[1]

Overload Limit(Failure)

8000 in-lb

904 N-m

Overload Limit(Safe)

6000 in-lb

678 N-m

Temperature Range(Operating)

+32 to +185 °F

0 to +85 °C

Temperature Range(Compensated)

+70 to +170 °F

+21 to +77 °C

Temperature Effect on Output(within compensated range)

0.003 %FS/°F

0.0054 %FS/°C

Temperature Effect on Zero Balance(within compensated range)

0.003 %FS/°F

0.0054 %FS/°C

ELECTRICAL

Power Required(50 to 60 Hz)

90 to 240 VAC

Digital Resolution

16 Bit

Digital Sample Rate

26,000 samples/sec

PHYSICAL

Maximum Speed

15,000 RPM

Permissible Axial Float(rotor to stator)

0.25 in

6.4 mm

Permissible Radial Float(rotor to stator)

0.25 in

6.4 mm

Rotating Inertia(without adaptors)

0.056 in-lb/sec2

0.006 N-m/sec2

Torsional Stiffness

5800 kin-lb/radian

655.312 kN-m/radian

Torsional Angle(at Full Scale Capacity)

0.020 °

Housing Material(Sensor)

Anodized Aluminum

Weight

3.5 lb

1.6 kg

SUPPLIED ACCESSORIES:

Model 182-028A Connector (1)

Model 8314-06-24A Cable (1)

All specifications are at room temperature unless otherwise specified.

NOTES:
[1]	Bolt joint slip torque is calculated assuming a coefficient of friction (µ) of 0.1 and that grade 8 socket head cap screws are used and tightened to 30% of yield.
[2]	Request Technical Note FTQ-STN5 regarding digital output signal.
[3]	Extraneous load limits reflect the maximum axial load, lateral load, and bending moment that may be applied singularly without electrical or mechanical damage to the sensor.
[4]	Where combined extraneous loads are applied, decrease loads proportionally.
[5]	Request Application Note AP-1015 regarding the effects of extraneous loads on the torque sensor output.
[6]	Root sum square of non-linearity, hysteresis, and non repeatability.
[7]	Output can be filtered via internal DIP switch (33, 55, 125, 250, 450 Hz).
[8]	See PCB Declaration of Conformance PS069 for details.

Keywords:

TORKDISC®, rotary torque sensor, 16-bit digital telemetry system, 2k in-lb FS, 15k rpm max

Measurement Range: (Full Scale Capacity) 2000 in-lb (226 N-m)
Temperature Range: (Operating) +32 to +185 °F (0 to +85 °C)
Torsional Stiffness: 5800000 in-lb/radian (655312 N-m/radian)
Overload Limit: (Bolt Joint Slip) 3300 in-lb (373 N-m)
Housing Material: (Sensor) Anodized Aluminum

ProductsCompany

PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers,and associated electronics for the measurement of dynamic pressure, force, and vibration.The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible.

Contact

Beijing Bron Science&Technology Commerce Co., Ltd.
Address：Room 512 of oriental Fortune,No.2 yard, North of the Anhua,Chongwen District，Beijing
Zip：100062
Tel：86 010-67114885/67124125/67152280
Fax：86 010-67124125
http://www.intl-sensor.com
E-mail:pcb@intl-sensor.com

Quick Navigation