PCB 4115
http://www.intl-sensor.com Time:2008/6/10 11:33:58 Count : 162 Times
PERFORMANCE |
ENGLISH |
SI |
Measurement Range(Full Scale Capacity) |
100 in-lb |
|
Sensitivity(± 15 %)(output at rated capacity) |
2.5 mV/V |
|
Non-Linearity |
≤ 0.05 % FS |
|
Hysteresis |
≤ 0.05 % FS |
|
Non-Repeatability |
≤ 0.03 % FS |
|
ENVIRONMENTAL |
|
|
Overload Limit |
300 in-lb |
|
Temperature Range(Operating) |
-65 to 225 °F |
|
Temperature Range(Compensated) |
+70 to +170 °F |
|
Temperature Effect on Output(Maximum) |
± 0.002 %Reading/°F |
|
Temperature Effect on Zero Balance(Maximum) |
± 0.002 %FS/°F |
|
ELECTRICAL |
|
|
Bridge Resistance |
350 ohm |
|
Excitation Frequency |
3.28 kHz |
|
Excitation Voltage |
2 to 10 VAC rms |
|
Bridge Current(at 5 VAC) |
50 mA |
|
Insulation Resistance |
>5000 Mohm |
|
Zero Balance |
≤ 2 % FS |
|
PHYSICAL |
|
|
Size (Shaft Length x Housing Length x Housing Diameter) |
9.10 in x 8.25 in x 6.00 in |
23.14 mm x 209.55 mm x 152.40 mm |
|
|
Weight |
46 lb |
|
Mounting |
Splined |
|
Sensing Element |
Strain Gage |
|
Housing Material |
Black Oxided Steel |
|
Shaft Material |
Steel |
|
Electrical Connector |
MS3102A-14S-5P |
|
Electrical Connection Position |
Side |
|
Torsional Stiffness |
13.5 kin-lb/radian |
|
Rotating Inertia |
0.0048 in-lb/sec2 |
|
Maximum Speed |
15,000 RPM |
|
SUPPLIED ACCESSORIES: |
Model 180-019A 5-socket mating connector for Series 3100, 4100, 4200 torque sensors |
Model 8113-105A Relay activated precision shunt calibration module |
All specifications are at room temperature unless otherwise specified.
|
NOTES: |
[1] |
Nominal. |
[2] |
Recommended 10 VAC RMS. |
[3] |
FS - Full Scale. |
[4] |
Over compensated operating temperature range. |
[5] |
See PCB Declaration of Conformance PS062 for details. |
|
Keywords:
Torque sensor, rotary transformer,
50 in-lb FS, flanges & splines per AND 10262 & AND 20002
ProductsCompany
PCB Piezotronics was founded in 1967 as a manufacturer of piezoelectric quartz sensors, accelerometers,and associated electronics for the measurement of dynamic pressure, force, and vibration.The unique expertise of the company was the incorporation of microelectronic signal conditioning circuitry within these sensors to make them easier to use and more environmentally compatible.
Contact
Beijing Bron Science&Technology Commerce Co., Ltd.
Address:Room 512 of oriental Fortune,No.2 yard, North of the Anhua,Chongwen District,Beijing
Zip:100062
Tel:86 010-67114885/67124125/67152280
Fax:86 010-67124125
http://www.intl-sensor.com
E-mail:pcb@intl-sensor.com
INTL-SENSOR CopyRight
© Copyright By WWW.INTL-SENSOR.COM All Right
tel:86 010-67152280/67114885/67124125
E-mail:
pcb@intl-sensor.com